63 lines
2.7 KiB
Plaintext
63 lines
2.7 KiB
Plaintext
flush ruleset
|
|
|
|
define wan = eth0
|
|
define vpn = wg0
|
|
define vpn_net = 10.0.0.0/24
|
|
define lan_net = 192.168.2.0/24
|
|
|
|
# Without the nd-* ones ipv6 will not work.
|
|
define allowed_icmpv6 = { destination-unreachable, echo-reply, echo-request, nd-neighbor-solicit, nd-router-advert, nd-neighbor-advert, packet-too-big, parameter-problem, time-exceeded }
|
|
define allowed_icmp = { destination-unreachable, echo-reply, echo-request, source-quench, time-exceeded }
|
|
|
|
define lan_clients = { 10.0.0.3 }
|
|
|
|
table inet firewall {
|
|
chain postrouting {
|
|
type nat hook postrouting priority 100;
|
|
|
|
# Masquerade WireGuard VPN traffic to LAN subnet
|
|
oifname $wan ip saddr $vpn_net masquerade
|
|
}
|
|
|
|
chain incoming {
|
|
# This line set what traffic the chain will handle, the priority and default policy.
|
|
# The priority comes in when you in another table have a chain set to "hook input" and want to specify in what order they should run.
|
|
type filter hook input priority 0; policy drop;
|
|
|
|
ct state invalid drop # early drop of invalid packets
|
|
ct state {established, related} accept # allow established/related connections
|
|
|
|
iif lo accept # allow traffic from loopback interface
|
|
|
|
# Limit and accept ICMP packets
|
|
ip protocol icmp icmp type $allowed_icmp limit rate 1/second burst 5 packets accept
|
|
ip6 nexthdr icmpv6 icmpv6 type $allowed_icmpv6 limit rate 1/second burst 5 packets accept
|
|
|
|
# Rules for all interfaces
|
|
tcp dport { 80, 443 } accept # Allow http and https for all interfaces
|
|
udp dport 443 accept # Allow quic (http/3) for all interfaces
|
|
|
|
# Rules for WAN interface only
|
|
iifname $wan tcp dport 22 limit rate 10/minute accept # Rate limit SSH (port 22) to 10 connections per minute
|
|
iifname $wan udp dport 51820 accept # Allow Wireguard incoming from WAN
|
|
|
|
# Rules for VPN interface only
|
|
iifname $vpn udp dport 53 accept # Allow DNS traffic from VPN
|
|
}
|
|
|
|
chain forward {
|
|
type filter hook forward priority 0; policy drop;
|
|
|
|
ct state invalid drop # early drop of invalid packets
|
|
ct state {established, related} accept # allow established/related connections
|
|
|
|
iifname $vpn ip saddr $lan_clients ip daddr $lan_net accept # Allow specific clients to access the LAN network
|
|
iifname $vpn ip daddr $lan_net drop # Block all other VPN clients from accessing the LAN network
|
|
|
|
iifname $vpn oifname $wan accept # Allow VPN traffic to access WAN
|
|
}
|
|
|
|
chain outgoing {
|
|
type filter hook output priority 0; policy accept;
|
|
}
|
|
} |